ACRASTRIP 600, 20L PAIL.
AcraStrip 600 B&G MOD (MILITARY) is a ready to use environmentally friendly biodegradable military solvent that was designed to replace MEK, acetone, xylene, toluene, and other hazardous cleaning solvents. Its composition is an aqueous blend of organic solvents and esters wetting agents. This acetone alternative was developed specifically for military applications where CARC paints are generally used. CARC paints are very resistant to cleaning and have previously required toxic products for cleaning and purging. However, Polychem AcraStrip 600 B&G MOD military solvent was specifically designed to purge (chemical agent resistant coating) CARC paints.
As an acetone, xylene, and toluene replacement AcraStrip 600 B&G (MILITARY) is a HAPs free, biodegradable, non-flammable, PH neutral and water dillutable composition. This MEK and acetone replacement has many different applications, some of which include:
Polychem AcraStrip 600 B&G MOD (MILITARY) replaces solvent materials such as MEK, acetone, xylene, toluene and many other solvents used in military painting facilities.
AcraStrip 600 B&G (MILITARY) is completely HAPS free and does not contain any SARA 313 listed solvents. This MEK, acetone, xylene and toluene replacement allows for separation thru simple gravity filtration. AcraStrip 600 B&G military solvent can also be filtered for re-use. Grease, resin and a host of other contaminants will settle to the bottom of the buckets, drums, totes or tanks for easy disposal. After this product is filtered it will continue to clean and flush lines for extended use. Once the AcraStrip life/cycle is complete, disposal of spent material dose not typically involve any HAZMAT removal fees.
Polychem AcraStrip 600 B&G MOD military solvent contains only 0.77 lbs/gal VOC at 15% use concentration, which is less than 10% compared to 100% VOC solvents. The technological improvement of surface chemistry coupled with fluid dynamics of AcraStrip 600 B & G MOD (MILITARY) enables it to perform as well as a solvent, but without the toxicity and hazardous waste disposal problems.
AcraStrip 600 B&G (MILITARY) is a safe and beneficial acetone alternative.
The following paints have been tested in operational settings and performed to a standard that matched or exceeded solvent purging in that facility.
*Note: It is strongly recommended to pretest a small cup sample of AcraStrip with subject chemical to determine compatibility, prior to system flushing.
Mil Spec # |
Coating Description |
|
Mil-C-53039 |
Single Component Moisture Cured Top Coat |
|
Mil-P-64159 |
Water Reducible Type 1 Urethane Top Coat |
|
Mil-P-53022 |
Type 1 CARC Epoxy Primer |
|
Mil-PRF-22750 |
CARC Epoxy Topcoat |
|
Mil-C-53039 |
2 Component Epoxy CARC Primer |
|
Mil-P-244441 R/19 |
Zinc Epoxy |
|
N/A |
Vinyl One Component |
|
N/A |
Anti-Fouling Copper High Solids Paint Marine Duraplate Epoxy |
